Does Your Worksite Comply With OSHA’s Fall Protection Standard?

Many would think that with the OSHA regulations for fall protection, the number of injuries, falls and deaths would be decreasing. To the contrary, OSHA reported that falls increased in the last several years. Often, construction sites have fall protection systems in place; however, the workers are not properly trained on how to use it. Another reason that the number of falls are increasing is because the fall protection systems in place are not properly installed. The only way to ensure that tragic accidents and falls do not happen is for construction worksite to follow the Fall Protection Regulations Occupational Safety and Health Administration (OSHA) set out.
Under OSHA Standard 29 CFR 1926.501-503, fall systems can be provided through the several systems. The guardrail system consist of a top rail located 42 inches above the floor. A mid rail also needs to be Home Improvements Companies installed mid-way between the top rail and the floor. The toe board must be 3 A� inches high. Screens and mesh may be used to replace the mid-rail as long as they extend from the top rail to the floor.
Another system is the personal fall arrest system. This can be a body harness, lanyard, lifeline, connector, and an anchorage Subcontractor Salary point capable of supporting at least 5000 pounds. The personal fall arrest system needs to be inspected before each use.
The positioning device system is a body harness that allows someone to work on a vertical surface such as a wall, with both hands free.
Safety monitoring system is having a trained person monitoring others as they work on an elevated surface and warn them of any fall hazard.
Another type of fall protection is the warning line system, which consists of line or ropes installed around the work area on the roof and this is only allowed on low pitched roofs. The lines or ropes act as a barrier to prevent those working on the roof from approaching the edges and must be on all sides and not less than 6 feet from the edge of the roof. It also must be used in conjunction with another fall protection system, typically the safety monitoring system.
It is critical to put an OSHA compliant fall protection system in place at the worksite to reduce the risk of accidents and injuries. Often times, worksites have fall protection, but they are often substandard, inadequate and do not provide a safe jobsite. As a result, workers fall and sustain catastrophic injuries. Employers may say there is fall protection system in place, but that’s not the end of the story. The fall protection system may be out of date or not properly installed. Even worse, workers are not properly trained to use the fall protection system despite the fact that there is one. Just because an employer has a fall protection system does not mean it is not at fault for a worker’s fall and injuries.…

Protection Against Construction Job Injuries

Federal labor statistics show that of those who get injured on Builders In London Uk sites, those between the ages of 25 and 34 are the most likely to get hurt. The reason for this is unclear, but it’s quite shocking. To make matters worse, these injuries tend to be back injuries or spinal injuries, usually from carrying something awkwardly or dropping it altogether. While working in the construction industry can be lucrative, it is also obviously dangerous.
While not all injuries in the construction industry are fatal or serious, there is definitely a serious level of danger for all employees. Over the last five years, fatalities (deaths) have gone down, but part of that is because the economy has gone south and caused quite a few people to become unemployed. Those in the construction field have faced serious consequences, with layoffs costing countless people their jobs. There were some recent economic statistics announced that new home growth is down due to the fact that there are over 12 months were of new homes currently on the market.
In addition to the injuries, they are overwhelmingly happening to men in construction. For example, there were over 155,000 construction related accidents in 2003, and only a little over 3,000 of them involved women. To make matters worse, most of the injuries caused workers to miss a month or more of work. Workers injure their legs, torsos, backs and arms the most. Ultimately, one out of every ten construction workers will suffer some form of injury this year.
For anyone looking for a construction job (or who already has one), it’s important to get the proper gear to protect yourself from serious injury. Many construction accidents can be prevented, but poor equipment, poor safety and poor planning often lead to injuries, wounds or even fatalities. Without properly protecting yourself, you could suffer a serious injury due to a construction accident.
A few ways to protect yourself include:
Proper eye gear – Obviously the eyes are some of the most sensitive parts of your Residential Electrician Salary 2019 body, so wearing goggles whenever possible can help protect your vision.
Insoles – People know to wear good boots on a construction site, but the padding inside your shoes could protect your back, your legs, your neck and more.
Speak up if you are hurt – There is always a fear that if you complain, you’ll get fired. In the end though, missing work for two or three months due to an injured spine is worse than getting fired, because while you can always get another job, you can’t get a new spine.…

Fire Protection During Construction

Fires are rarely sympathetic to any environment and can quickly destroy weeks, if not months of workmanship during a Definition Of General Contractor In Texas project. It is therefore crucially important that some often simple steps are taken to ensure your project takes the necessary precautions to prevent fire.
Keeping the construction area as clear as possible, particularly when left unattended, should be a key consideration on every foreman’s list. Reducing the amount of debris and combustible materials both within the build site and around its immediate boundaries can prevent a fire starting from a loose spark. Clearing the site of these materials should be carried out as often as practicable.
Many fires are started within the roof space of a build therefore it is important to prevent such an occurrence as much as possible. Do this by selecting materials that are fire resistant or do not combust such as Class A asphalt shingles, metal, cement or concrete products.
There are some design considerations as well which could be taken into account. For example, smaller panes and double glazed windows are much more effective in preventing the spread of fire from one room or building to another (providing the windows are built to the appropriate government and construction industry standards).
During the build process, be sure to use surface protection products in both the protection of the finished floor, wall or door, but also with Square Landscape Design consideration to the prevention of fire. There are numerous products on the market but not all are flame retardant. Why take the risk?
Carpet protection is one of the most common forms of surface protection as carpets are often the most easily of damaged finishings during the final stages of a build. This is perhaps one of the most important areas to ensure fire protection because a fire at this stage of a build is likely to destroy much more than just the carpet.…