DIY Aluminum Fence – Tips, Tricks, Things to Remember

DIY Aluminum Fence – Tips, Tricks, Things to Remember

Aluminum fences are available in a wide variety of designs from basic to ornamental. If you want to do more than delimitate your property line, consider an aluminum fence. Many models look like old iron fences with unique rails and posts. But unlike iron, aluminum fences are more cost-effective and not as difficult to install. When you are looking for the maximum in rust free fencing, a DIY aluminum fence is one of your best choices. Why give money to someone to install your new fence when you can just as easily do it yourself?

Most aluminum fences can be purchased as sets. In laymen terms, the sections of the fence and the posts are already prefabricated to specific lengths. Take an inventory of your property and figure out how much aluminum fencing you will need. Some fence manufacturers will tell you to begin by assembling the different pieces. This will include putting caps on all of the posts, and any other included hardware.

Commence with one post. Dig a hole and lower the post down. Make sure each post that goes in the ground goes in at the same depth. Add concrete to the sides once the post is in the hole. Next, add the individual fence sections. Usually, the sections will slide right into the post and are secured with screws. Work your way down to the location of the next end post, dig another hole and drop the post in. Pour in more concrete, and attach the existing sections to the post. Before moving on to another section between posts, take a level and put it on the top rail of the fence. Make sure that the posts are holding the fencing section in place at a level angle. Once you have determined that the first section is level, continue down the rest of the fence line. Keep checking to make sure that the sections are level before the concrete dries.

See also  A Split Rail Fence - Is it Worth It?